Inflatable model inflatable toys maintenance methods
Inflatable toy inflatable only to use it in case of leak completely useless, this is also inflatable toys, inflatable model is most afraid of the problems encountered. Today introduced the inflatable model of the leak repair approach.
When inflation is less than the gas leakage also non-normal leak, we need to be repaired, the repair method is very simple, like patching bicycle tires. Only need to use PVC materials Yue Tong play equipment and special resin adhesive agent can be repaired.
1, the paste
Uniform on the first toy you want to paste the Department and fabrics smear glue, and then dry to half a minute, fabric swatches attached to the paste at flatten Alice paste finished.
2, the toy has been scratched
1) draw the mouth longer than 5cm in needle stitched, and then paste the strips of cloth or fabric swatches
2) The designated port less than 5cm directly paste to
3 The seams open line
To the opening with needle and thread and stitched flat, (or from the air cushion at the bottom of open access and stitched), available paste openings processing firm, taking into account the appearance
Beautification at AliceApply the right amount of glue with a small brush at the edge of the Alice, pause pressure level compression, solid paste can be
Part of the easy wear parts after prolonged use and easy degumming, the available fabric cut into different shapes in the unglued at the paste can be
6, large leak
Toys after prolonged use, due to some parts of the pinhole line seam to widen the leak of the sharp rise can be considered with strips of cloth pasted on the seams to reduce the amount of air leakage, such as toys too old, you should consider scrapping to prevent operation of the problem.
7, cushion partial exception raised
Generally refers to pull the towel on a cushion of tearing open along the seam to the bottom of the cushion apart, stretch and cushion with needle and thread, and then paste the strips of cloth.