Releasing the Inflatable Products smartly
Releasing the inflatable more with less, easy effort ,fixing the inflatable anchor is the key.
1:first fixed good power line, do open, and close power no impede ;
2:opened the inflatable products package, expand it, inflatable products around of rope buckle respectively buckle good rope ;
3:stuffing with sandbags around the inflatable products feet;
4:blow up the inflatables, adjust location if unstable, with front and rear Sling fixed ropes on the products ;
5:pay attention to weather the day before of using inflatable products, if there is wind, prepared on demand fixing ropes and sandbags. If more than six level of the wind, you should not be blown up the products.When using,if you are not careful of pedestrians touch power off fallen inflatable product, simply plug the power supply, the inflatable stand up again.
Inflatable release emergency measures
In the course of work, just like we release the inflatable castle, will always have unexpected emergencies: such as cables, such as short circuit, the air blower does not run. Most exasperating is the inflatable product was cut a big hole in the process. And you also happens without a needle, not stitched. How to do in such situation? People always used the following methods: transparent fabric adhesive or the hole tied with a rope. But this is often unable to work, a long time often is the leakage. Don't worry, pursuant to the size of the hole, got the old banners close to the size of the hole, though is not very beautiful, but it's stronger than can't release the inflatable.